TLCB, TLCHB – Single wet rotor circulators

TLCB SERIES

The electric circulator pumps for sanitary hot water circulation of the TLCB series work at a maximum temperature of 65°C , maximum hardness of 25° f (14°dH) and maximum viscosity of 10 mm2 /S.

The electric circulator pumps for sanitary hot water circulation of the TLCB series have a bronze pump body designed for direct installation onto copper piping, with 1″, 1″ ¼ and 1″ ½ threaded connections. They are in compliance with the EN standards 60335-1, 60335-2-51, 55014-1, 55014-2.


MARKET SECTORS: RESIDENTIAL.

APPLICATIONS

  • Circulation of sanitary hot water

SPECIFICATIONS

PUMP

  • Flow rate: up to 5 m3 /h.
  • Head: up to 6 m.
  • Temperature of pumped liquid: +2°C ÷ +65°C. Avoid condensation and ice formation.
  • Maximum operating pressure: 10 bar (PN 10).
  • Impeller: made of composite material.
  • Wear ring: ceramic.

MOTOR

  • Wet rotor type, with bearings lubricated by the pumped liquid. Axial and radial bearings made of ceramic.
  • Single-phase 230 V 50 Hz power supply. Terminal box axially integrated in the motor.
  • Three speed hand selector motor.
  • Insulation class 180 (H).
  • Protection class IP 44.

ACCESSORIES

  • Pipe unions.
  • Insulation shell.

INSTALLATION

Suitable for installation in horizontal or vertical piping, in any position provided that motor axis is horizontal.


TLCHB SERIES

The electric circulator pumps for sanitary hot water circulation of the TLCHB series work at a maximum temperature of 65°C , maximum hardness of 25° f (14°dH) and maximum viscosity of 10 mm2/S.

The electric circulator pumps for sanitary hot water circulation of the TLCHB series have a bronze pump body designed for direct installation onto copper piping, with 1″ ¼ and 1″ ½ threaded connections. They are in compliance with the EN standards 60335-1, 60335-2-51, 55014-1, 55014-2.

MARKET SECTORS: SANITARY LIGHT COMMERCIAL.

APPLICATIONS

  • Circulation of sanitary hot water in high flow/high head installations.

SPECIFICATIONS

PUMP

  • Flow rate: up to 12 m3/h.
  • Head: up to 12 m.
  • Temperature of pumped liquid: +2°C ÷ +65°C. Avoid condensation and ice formation.
  • Maximum operating pressure: 10 bar (PN 10).
  • Impeller: made of composite material.
  • Wear ring: ceramic.

MOTOR

  • Wet rotor type, with bearings lubricated by the pumped liquid. Axial and radial bearings made of ceramic.
  • Single-phase 230 V 50 Hz power supply. Terminal box axially integrated in the motor.
  • Three speed hand selector motor.
  • Insulation class 180 (H).
  • Protection class IP 44.

ACCESSORIES

  • Pipe unions.
  • Insulation shell.
  • INSTALLATION

Suitable for installation in horizontal or vertical piping, in any position provided that motor axis is horizontal.